Eenglish-tests.com

C1 Text 6 · Article · 706 words

Why Bridges Stand Up

A feature explaining the forces of compression and tension, how beam, arch and suspension bridges deal with them, and why moving loads such as footsteps can surprise even modern engineers.

Every day, millions of people cross bridges without giving them a second thought. We take it for granted that the road beneath our wheels will still be there on the far side of the river. Yet every bridge, from a plank over a stream to a vast suspension bridge, is a solution to the same problem: how to carry a load across a gap and deliver its weight safely to the ground. Understanding how engineers solve it reveals a great deal about the invisible forces that surround us.

Two forces lie at the heart of the matter. Compression squeezes a material, pushing its particles together; tension stretches it, pulling them apart. Different materials respond to these forces in very different ways. Stone and concrete are immensely strong in compression but crack easily when stretched, whereas steel cable copes superbly with tension yet would simply buckle if you tried to push on it. Much of the history of bridge building is the story of learning to put each material where it performs best.

The simplest design, the beam bridge, is a rigid horizontal span resting on supports at each end. When a lorry drives across, the beam bends slightly: its upper surface is compressed while its lower surface is stretched. This is why a beam cannot be made indefinitely long. The longer the span, the more it sags under its own weight, and the deeper and heavier the beam must become, until it is carrying little but itself. For longer gaps, engineers have to be cleverer.

The Romans grasped this long before anyone could calculate it. Their stone arches, some of which still carry traffic today, work by turning the downward weight of the bridge into a push that follows the curve and runs down into the ground. Every stone is pressed against its neighbours, so the entire structure is in compression, precisely the force that stone resists best. The wedge-shaped stone at the top, the keystone, locks the others in place. An arch does, however, need solid supports at each end, known as abutments, to stop its feet from spreading outwards.

Suspension bridges reverse the logic. Instead of pushing, they hang. The road deck is suspended from vertical cables attached to huge main cables, which are draped over tall towers and anchored firmly in the ground at either end. Here the cables are in tension and the towers in compression, and because steel is so strong when pulled, this design can cross the widest gaps of all. Its close relative, the cable-stayed bridge, runs cables directly from the towers to the deck in a striking fan or harp pattern.

Calculating fixed loads is only half the challenge, though. Bridges must also cope with forces that change over time, such as wind, traffic and even footsteps. Every structure has a natural frequency at which it tends to vibrate, and if a repeated push happens to match it, the movements can grow alarmingly, an effect known as resonance. When London's Millennium Bridge opened in 2000, it began to sway as crowds crossed it. Engineers discovered that, as the deck moved slightly sideways, pedestrians instinctively adjusted their steps to keep their balance, falling into step with one another and making the swaying worse. The bridge was closed for a time, fitted with dampers that absorb movement, and reopened without the problem.

Modern engineers are, in some respects, far better equipped than their predecessors. Computer models allow them to test a design against storms and earthquakes before a single foundation is laid, and sensors on finished bridges can report tiny changes in strain. Yet many of them insist that intuition still matters. 'Software tells you whether a design will stand up,' one bridge designer, Helen Achebe, remarked at a recent conference, 'but it can't tell you whether it's a good idea in the first place.' Bridges are also expected to be beautiful, affordable and long-lasting, and balancing those demands is as much an art as a science.

Perhaps the most remarkable thing about bridges is how quietly they do their job. Behind their apparent stillness lies a constant, carefully managed contest between forces, and it is only when that balance is lost that most of us notice them at all.

Words in colour are explained in the glossary below.

Glossary

WordMeaning
take it for granted/ˌteɪk ɪt fə ˈɡrɑːntɪd/expect something to be true or to happen without thinking about it
compression/kəmˈpreʃən/a force that presses or squeezes something together
tension/ˈtenʃən/a force that pulls or stretches something
buckle/ˈbʌkəl/bend and give way under pressure
sags/sæɡz/bends or hangs down in the middle
keystone/ˈkiːstəʊn/the central stone at the top of an arch that holds the other stones in place
abutments/əˈbʌtmənts/strong supports at the ends of a bridge or arch
anchored/ˈæŋkəd/fixed firmly so that it cannot move
vibrate/vaɪˈbreɪt/shake with small, quick movements
resonance/ˈrezənəns/when small repeated pushes match the way something naturally moves, so the movement grows bigger and bigger
instinctively/ɪnˈstɪŋktɪvli/naturally, without thinking about it
dampers/ˈdæmpəz/devices that reduce shaking or movement
predecessors/ˈpriːdɪsesəz/people who did the same job before
strain/streɪn/the small change in shape of a material when a force acts on it

Why Bridges Stand Up: tests

Found this text useful? Share it with a friend or your class.